Mitutoyo BM1 Series - Document Conventions and Symbols; Safety Hazard Symbols and Notices; Referential Information and Location Conventions; General Textual Conventions

2
No. 99MAK004B
Conventions Used in This Document
■ Safety reminder conventions warning against potential
hazards
NOTICE
Indicates a situation which, if not avoided, may result in
property damage.
■ Conventions indicating referential information or reference
location
IMPORTANT
Indicates information that must be known when using the
product.
Tips
Indicates further information and details relevant for the
operating methods and procedures that are explained in
that section.
Indicates reference location if there is information that
should be referred to in this document or an extraneous
User's Manual.
Example: For details about XX, see
"2 How to Use
Gauge Blocks" on page 11.
■ Other conventions
( ): Round
brackets
Represent a paraphrase of an immediately preceding
phrase or a supplementary explanation.
" ": Double
quotation marks
Represent a highlighted phrase. They also indicate an
index where information to be referenced is described.
1 , 2 , 3 Indicates the order and the contents of tasks.
1 , 2 , 3 , ...
( 1 : indicates main tasks, 1: indicates detailed tasks)
»
Indicates the action resulted from some operation(s).