Mitutoyo ID-C0512CNX - Change Other Functions; Selecting Setting Items

65
No. 99MAH056A
5 Setting Parameters
(Short press) / (Long press)
5.11
Change Other Functions
5.11.1 Selecting Setting Items
There are three types of parameter items in "Change other functions".
F1
F1
F3
F3
F1
F3
F2
F2
F2
F2
F1
F1
F3
F2
"5.11.2 Calibration Schedule
Warning Selection/Setting" on
page 66
"5.11.3 Selecting Digimatic Output"
on page 71
"5.11.4 Auto OFF setting" on
page 72
"5.11.5 All Reset" on page 73