Mitutoyo Measuring Projector - Maintenance of Mechanical Components

5.2 Maintenance of Mechanical Components
5.2.1 Projector main unit
Periodically lubricate the feed screws and gears for the cross-travel stage vertical travel.
To do so, open the door at the right front of the projector, and apply a thin coat of grease
using a brush. Take care to keep the grease away from other parts of the projector
interior, especially the bulbs.
5.2.2 Cross-travel stage
Remove the cross-travel stage from the stage mount, and apply a small amount of
spindle oil to the V-groove guide rail. Use a soft, dry cloth to wipe dust off the stage glass
and clean the glass gently with thinners or alcohol.
5 - 2 No.99MBA043A