Manual instruction Mixer Plus Mixer Technology srl pag.17
ELECTRICAL CONNECTIONS
Verify that the starter electrical connections, is complies to to the legislation in
force in electrical connections safety area (marking CE).
The machine is not suitable to connect to power supply outlets of house systems.
Verify to provide voltage and power appropriate to the machine.
Verify that thermal magnetic circuit breaker protection and residual current
protection (life saver) is installed.
All the electrical connections (plugs - sockets) must be CEE industrial type with
protection degree IP67.
The use of extension cords is admitted only if made in safety standards (cross-
section of conductors, insulation, earthing, etc..)
To Next Page
Loading...