Manual instruction Mixer Plus Mixer Technology srl pag.9
UNPACKING
1) Remove the protective film;
2) With a proper tool, cut the straps paying attention not to be hit by the same due to
their elasticity;
3) Release the brake of the pivoting wheel;
4) With the help of a second operator, let the machine carefully get off the pallet
lifting it using the proper handles positioned on the machine sides;
5) Lock the brake of the pivoting wheel.
USE DESTINATION
The use destination of the machine is to use in building sector for the Mixing and
spraying of pre-mixed products having a max. granulometry of 5 mm, suitable for
plastering.
Can be used for the processing: Pre-mixed plasters, dry or in silo, having as base:
plaster, plaster lime, cement lime, finishing plasters, stoppers, coloured plasters,
gluing agents in general, foundation for floors and mortars.
Any other different use is potentially inappropriate.
DISPOSAL
At the disposal time of the machine, compulsorily observe the provisions of the
regulations in force.
Separate the parts making up the machine according to the different construction
materials (plastic, copper, iron, etc...).
Lubricant liquids and any other fluids shall absolutely not be dispersed in the
environment.
These products, deemed polluting and hazardous, shall be compulsory disposed
entrusting companies authorized and specialized for the different types of product.
To Next Page
Loading...