Manual instruction Mixer Plus Mixer Technology srl pag.8
PACKAGING
Usually the machine is packaged by the Manufacturer on wooden pallet, fastened with
straps and wrapped with a film.
List of supplied loose components:
No. 1 Mixer;
No. 1 Rotor;
No. 1 "T" wrench;
No. 1 Spraying nozzle;
No. 1 Material conveying tube (ø est. 39 mm - L= 15 m);
No. 1 Air tube (ø est. 19 mm - L= 16 m);
No. 1 Water tube (ø est. 26 mm - L= 40 m);
No. 1 Power supply cable with outlet, without plug (L= 50 m).
Components positioned in the tool carrying box
No. 1 Instructions for use and maintenance;
No. 1 "Anti-grip" liquid bottle with sprayer;
No. 1 Cleaning device;
No. 1 Spraying nozzle air tube cleaning tool;
No. 1 Screwdriver;
No. 1 Fixed wrench (2 sizes 24 - 36 mm);
No. 1 Fixed wrench (3 sizes 30 - 13 - 10 mm);
No. 2 Diffuser rubber spare (nozzle) parts for spraying nozzle;
No. 2 Small foam rubber balls to clean the material conveying tube;
No. 2 Water tube fittings;
No. 2 Water tube clamps;
No. 2 Fittings (reduction units) for water inlet (1" - 3/4");
No. 1 Fast connection for cleaning the material transport tube;
No. 1 Cleaning device rod.
To Next Page
Loading...