MIXER PLUS Series - Parts List

Manual instruction Mixer Plus Mixer Technology srl pag.7
PARTS LIST
1. Mixing chamber locking lever
2. Hopper protection grating with bag cutting blade
3. Compressor
4. Hopper discharge door
5. Water pump
6. Water inlet
7. Cell wheel gearmotor
8. Service tap
9. Pivoting wheels
10. Lifting handles
11. Water pressure reduction unit
12. Water line pressure gauge
13. Water adjustment valve
14. Mixing assembly gearmotor
15. Water inlet in the mixing chamber (light products)
16. Water inlet in the mixing chamber (all products, except for light ones)
17. Flow meter
18. Water drain tap
19. Stator (plenum chamber)
20. Material output connection
21. Material output pressure gauge
22. Gearmotor power supply outlet (only mod. Plus Mono)
23. Trunket
24. Mixing chamber
25. Gearmotor assembly locking device
26. Main power supply plug
27. Rear connection points for the fairing