Mixman DM2 - Crossfader Function; Transformer Feature; Using the Transformer

9
1. To create a macro, select a combination of tracks then hold down one of the
four Macro buttons on the lower left of the DM
2
controller for about two
seconds to take a snapshot.
2. Press one of the four Macro buttons to switch between Macro settings.
Crossfader
One of the universal features of every DJ mixer is the Crossfader. The
Crossfader controls the volume of the turntables. When the Crossfader is all the
way to the left, only the left turntable is heard. When the Crossfader is moved
toward the center, more of the right turntable audio is heard. When the
Crossfader is in the center, both turntables are at full volume. As the Crossfader
moves toward the right, the left turntable gets softer. When the Crossfader is all
the way to the right, only the right turntable is heard.
Experiment with the Crossfader, slowly moving it back and forth while both
turntables have sounds locked.
Transformer (A and B Buttons)
One of the more popular DJ techniques is called transforming. This technique
usually involves two records, one record with a beat, and the other with a
sustained voice. With both records playing, the Crossfader is set so that only the
beat can be heard. Then the DJ rhythmically taps on the Transformer button
nearest the turntable with the voice. This makes the sound of the voice with the
rhythm of the tapping.
To use the Transformer feature of the DM
2
:
1. While playing, lock sounds on both turntables.
2. Move the Crossfader all the way left or right.
3. Now, tap on the Transformer button (A or B) opposite the Crossfader.
These A and B buttons allow you to override the Crossfader and quickly
maximize volume on either side of the deck.
Examples:
A ----------[]---------- B
A deck volume = 100
B deck volume = 100
In this case, pressing either button would have no effect.
****************************************