16
Recording Studio Screen
To give your music a personal touch, record custom vocal or instrumental
sounds. Sound recordings made with the DM
2
are saved as 44.1 kHz mono .wav
files. Once recorded, the .wav files may be edited using a .wav editor.
Remember that large recordings take up lots of space. The DM
2
puts all of the
sounds into RAM, if you record a sound that is too long, it might not fit in the
available RAM.
To Record a New Sound:
Note: You need a microphone or other audio input device plugged into your
computer to record a new sound.
1. Click on a track in which the recorded audio will reside.
2. Click the “Record” button on the Recording Studio screen to begin recording.
3. When finished, click the “Stop” button.
4. To hear the recorded .wav file, click the “Play” button.
5. To save the recording, enter the name of the new .wav file in the “Name New
Track” box.
6. Click on the Remix button in the lower right corner to return to the Remixing
Studio.
To Next Page
Loading...
