Mixman DM2 - Audio Options; Customizing Mixes; Adding New Sounds to Tracks

10
A -----[]--------------- B
A deck volume = 100
B deck volume = 50
In this case, pressing button B would change the volume of the b deck to 100
while the button was held.
****************************************
A []--------------- B
A deck volume = 100
B deck volume = 0
In this case, pressing button B would change the volume of the b deck to 100
while the button was held.
Tip: Transforming works the best when the sound being transformed is
sustaining (like a string or voice), meaning never silent. This ensures that
whenever you tap there will always be sound.
Audio Options
Below the on-screen image of the DM² controller are several options you can use
to further customize your Mixes.
• Tempo – affects the whole Mix. Adjusting the tempo speeds up or slows
down the pace of the Mix.
• Master Volume – click on the speaker icon in the Tempo bar to bring up a
slide bar that controls the volume of your entire mix.
• Panning – affects an individual track. Adjusting the panning moves sound
output between the left and right speakers.
• Volume – affects an individual track. Adjusting the volume makes the track
audio louder or softer.
• Pitch – affects an individual track. Adjusting the pitch raises or lowers the
pitch of a sound in half-step intervals.
Customizing Mixes
It is also possible to customize your Mixes by adding new sounds into any of the
16 tracks.
1. Use your mouse cursor to double click one of the 16 track indicators
onscreen.
2. Double-click on a .trk or .wav file in the dialog box to preview the audio or
click the “Preview” button.
3. Select the Load Track button to load the track in the Remixing Studio.