1, increase the number of languages, can switch online 7 languages;
2. Repair the problem of WIFI transmission.
3. The function of feeding is optimized.
1, the V3.0.1 firmware version WIN8 style in the switch language font
display effect is not good, so win8 style can only use picture display.
2, the difference between the Chinese version and the English version of
firmware is that the annotation in the configuration file is in Chinese or
English.
3, V3.0.1 firmware version added configuration item: manual leveling XY
axis movement, extrusion head Z axis from the height of origin (mm)
4. V3.0.1 firmware version update the blue version of the motor button
button.
5, repair the V3.0.1 firmware version WIN8 version of the English version of
the manual leveling icon instead.
1. Add the "turn off motor" on the return to zero interface in the classic
version.
2. Modify the preheating interface and change the default 180 to 0 to show
the actual target temperature.
3, increase report error function, filter line number error.
4, fan press + - to start
5, click the "more" command processing function will appear reboot
phenomenon.
6. When more than 5 instructions are reset using M110, the motherboard
will stop action.
7. Adding configuration items can shield the power off and filament
detection function.
8, modify the bug that the serial interrupt sends will be interrupted
9, modify the U disk or SD card printing failed to read.
10. Add the configuration item to support the two - in - out model
11. Add a button on the WIFI interface to control whether the WIFI module
function.
12, repair the simplified version and retro version of the firmware manual
manual adjustment, do not return to zero, then start leveling.
13, WiFi firmware repair password settings are less than 8 bits when using
abnormal problems.
To Next Page
Loading...
