MKS Instruments UK Ltd
V2000-C/E Hardware Manual – SP102005.102 March 2013 21
Electrical Installation
WARNING
The electrical installation must be carried out by qualified
personnel in accordance with local standards and regulations.
The electrical installation should be carried out after the vacuum system installation. Please follow the next
sections, in sequence.
Electrical specification
See the RVC2 and Microvision2 User Manuals for specifications
Only use IEC or UL approved Mains fuses are used to protect this equipment:
Safety Class I
Installation Category II
Pollution Category II
WARNING
This appliance must be earthed
To Next Page