5.5 Simulation Data
When StarTracker is running without a loaded map a data stream is sent for test purposes only.
The xx values increment continuously to provide data for test purposes. The rst decimal place
corresponds to the axis; X=0.1 Y=0.2 Z=0.3 P=0.4 T=0.5 R=0.6
The xx values will linearly ramp up after the rst decimal place (e.g., from P=0.41 to P=0.49) so
that you know that the data is continuously coming in.
StarTracker Max Manual
2023 - 2024 © Mo-Sys Engineering Ltd. All rights reserved 17 of 70
To Next Page
Loading...
