The lens les are stored in runtime/lens as .json les or .dat les, if tweaked in UE5.
Show Name shows the name of the lens at screen bottom.
14.3 Sync Data Input
Enter your intended Genlock in Data > Sync Type. Click repeatedly until your desired sync value
is displayed; 24p, 25p, 30p, PAL, NTSC, Unknown.
Any analogue sync signal will be accepted (Blackburst, TriLevel).
If the REF symbol at bottom of screen is green you know the unit receives a good sync signal,
also the number on bottom left should be green.
StarTracker Max Manual
2023 - 2024 © Mo-Sys Engineering Ltd. All rights reserved 62 of 70
To Next Page
Loading...
