+1(323)904-3000 40 www.mobiusa.com
Radiated
RF IEC
61000-4-
3
3 V/m
80
MHz to
2.5GHz
3 V/m
Where p is the maximum
output power rating of the
transmitter in watts (W)
according to the
transmitter manufacturer,
and d is the recommended
separation distance in
meters (m).
Field strengths from fixed
RF transmitters, as
determined by an
The electromagnetic site
survey should be less than
the compliance level in
each frequency range.
Interference may occur in
the vicinity of equipment
marked with the following
symbol:
• NOTE 1: The higher frequency range applies at 80 MHz
and 800 MHz
• NOTE 2 These guidelines may not apply in all
situations. Electromagnetic is affected by absorption
and reflection from structures, objects, and people.
To Next Page