10 xTablet Flex 8 User Guide
If you want to access a Wi-Fi network that does not broadcast its network name or service set identifier (SSID),
you must add that Wi-Fi network before you can connect to it.
To Add a Wi-Fi Network
1. Swipe in from the right to display the Windows Charms bar.
2. Tap Settings, tap Network, then tap the network icon to display the available Wi-Fi networks.
3. Tap Hidden network, then follow the onscreen instructions to add the Wi-Fi network.
Each location profile stores all the network and Internet configuration settings needed for connecting to a network
infrastructure from a specific location such as a home or an office. By switching between location profiles as you
move your tablet from place to place, you can quickly and easily connect to a network with no need to reconfigure
your settings manually and restart the tablet each time.
To Add a Network Profile
1. Swipe in from the right to display the Windows Charms bar.
2. Tap Settings, tap Control Panel, tap Location Settings, then follow the onscreen instructions to add a
network profile.
Entering the BIOS
To Enter the BIOS
Turn on the tablet, then start pressing the F2 using a regular keyboard.
Locking the xTablet
To Lock the Unit
Press the power button.
Refreshing the xTablet
If the xTablet Flex 8 does not perform well and the problem might be caused by a recently installed program, you
can refresh the tablet without losing your personal files or changing your settings. Attention: If you refresh the
tablet, the programs that came with the tablet and the programs you installed from Windows Store will get
reinstalled, but all other programs will get removed.
To Refresh the Tablet
1. Swipe in from the right to display the Windows Charms bar.
2. Tap Settings, tap Change PC settings, then tap General.
3. In the Refresh your PC without affecting your files section, tap Get started.
To Next Page
Loading...
