Page 42 of 46
Relative Humidity: 0% to 80% non-condensing
Altitude: 2000m
Transport and Storage
Ambient Temperature: 10° to 40°C
Relative Humidity: 0% to 80% non-condensing
General Info
Type B Applied Parts
IP21 Rating Solid particle protection: Level 2 (>12.5mm)
Liquid ingress protection: Level 1 (dripping
water)
Wireless Communications
Wi-Fi IEEE 802.11 ac/a/b/g/n; transmits at 2.40 to 2.48 GHz at
+16dBm
Operating Range: 50m
IEEE 802.15.4 Bluetooth class II Bluetooth 2.1_EDR/BLE 4.2; transmits at 2.40
to 2.48 GHz at +16dBm
Operating Range: 20m
Electromagnetic Compatibility Guidance
Manufacturer’s Declaration – Electromagnetic Emissions
The EVA Pro is intended for use in the electromagnetic environment specified below. The
customer or the user of the EVA Pro should ensure that it is used in such an environment.
Emissions Test Compliance EMC Environment Compliance
RF Emission
Group 1
The EVA Pro uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and not likely to cause any
interference in nearby electronic equipment.
CISPR 11
RF Emission
Class A
The EVA Pro is suitable for use in professional
healthcare environments.
CISPR 11
Conducted RF
Emissions
Not Applicable
Radiated RF Emissions Complies
Harmonic Distortion
Not Applicable
IEC 6100-3-2
Voltage Fluctuation and
Flicker
Not Applicable
IEC 61000-3-3
Manufacturer’s Declaration – Electromagnetic Immunity
The EVA Pro is intended for use in the electromagnetic environment specified below. The
customer or user of the EVA Pro should ensure that it is used in such an environment.
Immunity Test IEC 60601 Test Level
Compliance
Level
Electromagnetic
Environment – Guidance
To Next Page
Loading...
