Mocom Tethys H10 - ERRORS (CATEGORY S)

80
OPERATOR'S MANUAL
EN
ERRORS (CATEGORY S)
CODE
MESSAGE ON THE
DISPLAY
DESCRIPTION
EXIT
S001
FLASH NOT ACCESSIBLE
Flash memory not accessible
2
S002
FLASH FULL
Flash memory full.
2
S003
SD CARD NOT
ACCESSIBLE
Micro SD card not accessible for data
storage in start-up phase.
2
S004
SD CARD FULL
Micro SD Card full
2
S005
USB STICK ERROR
USB stick not accessible (interruption
of communication after download
started successfully).
2
S006
USB STICK NOT
ACCESSIBLE
USB Stick not accessible (before
download start)
2
S007
USB STICK FULL
USB stick full
2
S008
SD CARD NOT
ACCESSIBLE
Micro SD not accessible during data
storage phase
2
S018
IMPOSSIBLE TO OPEN
CRC FILE
CRC file inside SD card cannot be
opened
2
S020
RUN BACKUP
Cycle report to be downloaded
recommended limit has been reached.
2
S021
OVERWRITE DATA
Cycle report to be downloaded limit in
case of SD Card malfunction has been
reached.
2
S030
SYSTEM ERROR
Malfunction in software running.
2 (out of
cycle)
3 (in cycle)
S031
SYSTEM ERROR
Malfunction in software running.
2 (out of
cycle)
3 (in cycle)
S032
SYSTEM ERROR
Malfunction in software running.
2 (out of
cycle)
3 (in cycle)
S033
SYSTEM ERROR
Malfunction in software running
2 (out of
cycle)
3 (in cycle)
S100
INCONSISTENT STATUS
Software problem in management of
the correct sequence of events
3
1 = OK (warning) + chamber emptying
2 = OK (warning)
3 = cycle interruption + ok + door unlock + reset 3