Need help?Do you have a question about the Mocom Exacta and is the answer not in the manual?
General| Brand | Mocom |
|---|---|
| Model | Exacta |
| Category | Laboratory Equipment |
| Language | English |
Illustrates the front of the autoclave, highlighting key components and safety warnings.
Details the control panel, including buttons, displays, and signaling LEDs for operation.
Shows the rear of the autoclave and identifies its various ports and connectors.
Provides instructions and requirements for connecting the autoclave to the electrical supply.
Explains the procedure for connecting an external printer for cycle reports.
Describes how to link the autoclave to a PC for monitoring and control.
Details the process for installing the bacteriological filter.
Offers guidance on safely moving, transporting, and storing the autoclave.
Step-by-step guide on how to power on the autoclave and initiate the pre-heating phase.
Instructions for filling the distilled water tank to the correct level for operation.
Explains how to set the date and time for accurate reporting and logging.
Explains the function of each button and the meaning of various indicator LEDs on the front panel.
Describes how the temperature is displayed and its meaning during different cycle phases.
Details the pressure readings and their interpretation during the sterilization cycle.
Explains the timer display for cycle progress, alarms, and status codes.
Describes how the autoclave indicates the water levels in the distilled and used water tanks.
Details the function of the START/STOP button for initiating and managing sterilization cycles.
Guide on selecting predefined sterilization programs based on load type and temperature.
Instructions for selecting appropriate disinfecting cycles at specific temperatures.
Explains how to use the fast cycle for urgent sterilization of loose tools.
Information on how to program custom temperature and time settings for non-standard cycles.
Explains the function of the DRY OFF key, including its use for special programs.
Describes the main power switch and the alarm indicator for general failures.
Details the automatic power-off feature when the unit is idle.
Outlines the typical phases and progression of a sterilization cycle.
Instructions on how to safely interrupt an ongoing sterilization cycle.
Procedure for draining the used water from the collection tank.
General advice on maintenance, component replacement, and the necessity of technical service.
Describes routine cleaning tasks for the autoclave and its components.
Provides a schedule for daily, weekly, monthly, and yearly maintenance tasks.
Specific instructions for cleaning the door gasket and port-light to ensure proper sealing.
Guidelines for cleaning and disinfecting the exterior surfaces of the autoclave.
Steps for cleaning the internal chamber, tray holder, and trays.
Instructions on how to replace the bacteriological filter to maintain performance.
Procedure for cleaning the tank that stores distilled water.
Steps for cleaning the filter located within the sterilization chamber.
Guidance on checking and maintaining the safety valve for overpressure release.
Instructions for replacing the door gasket when it shows signs of wear.
Details on lubricating moving parts and locking mechanisms for smooth operation.
Catalog of error codes displayed on the timer and their corresponding meanings.
Practical advice and solutions for common operational problems encountered by users.
Lists the detailed technical specifications, dimensions, and electrical requirements of the autoclave.
Provides essential preparatory steps and guidelines for effective sterilization.
Instructions for cleaning instruments before placing them in the autoclave.
Guidance on how to properly arrange instruments and materials on the trays for optimal steam penetration.
Displays images and codes for optional accessories available for the autoclave.
A list of common spare parts with their corresponding part numbers for replacement.
A schematic diagram illustrating the autoclave's electrical components and connections.
A diagram showing the autoclave's hydraulic system, including valves and reservoirs.
A blank section for users to record personal notes or observations related to the autoclave.
To Next Page
