Mocom Exacta - Stopping the Cycle; Emptying the Used Water Tank

EXACTA
41
OPERATION
E n d
°C
* TAKE CARE TO OPEN THE DOOR ONLY
AFTER THE END SIGNALING ON THE
TEMPERATURE DISPLAY. USE THE SPE-
CIAL TRAY REMOVAL TONG AND VERIFY
THAT LED STER. IS FLASHING.
F3
Min
E n d
°C
Min
* WITH THIS SIGNALING, THE CYCLE DOES
NOT START WITH THE START COMMAND,
AND THE TIMER DISPLAY TURNS TO
SHOW THE ERROR CODE F6 (TANK FULL).
STOPPING THE CYCLE
EMPTYING THE USED WATER TANK