EasyManua.ls Logo

Mocom Exacta - Appendixes; Technical Characteristics

Default Icon
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EXACTA
59
APPENDIXES
Type of appliance
EXACTA
Manufacturer
M.O.COM. S.r.l.
Via delle Azalee, 1
20090 BUCCINASCO - MI - ITALY
Supply voltage
230V (other voltages upon request)
Frequency
50/60Hz
Fuses
Mains: 2 x F 8A/250V (type 6,3 x 32)
F1 - Electronics : T 1,6A/250V
(type 5 x 20)
F2 - Electrovalves: T 1,6A/250V
(type 5 x 20)
F3 - Resistance: T 10A/250V (type 5 x
20)
F4 - Transformer: T 315mA/250V
(type 5 x 20)
Total power
1700 W
Insulating class
Class I
Installation category
Cat. II
Operating environmental
Internal use
Environmental conditions
Temperature range: +15 ÷ +35°C
Maximum relative humidity: 80%
maximum height: 1000 m
Operation
Microprocessor controlled
Instrumentation
Digital
Printer connection arrangement
DB-25 pin female connector, parallel interface
PC connection arrangement
jack female connector, 3-pin, serial interface
Operation cycles
6 sterilization cycles
3 disinfecting cycles
programmable cycle:
cycle Fast
cycle Dry Off
Vacuum Test
Test cycles
Vacuum Test (sealing)
Mechanic starting vacuum
yes
Vacuum drying
yes
Bacteriological filter
yes (porosity 0,2 µm)
Outer dimensions
445 x 388 x 425 (L x H x D)
Sterilization chamber dimensions
diam. 240 mm - depth. 350 mm
Mounte
d on
p.c.b.
TECHNICAL CHARACTERITICS

Table of Contents

Related product manuals