EXACTA
43
IN CASE OF REPLACEMENT OF COMPONENTS
HAVING A DIRECT OR INDIRECT INFLUENCE
ON THE SAFETY IT IS ESSENTIAL TO USE
ONLY ORIGINAL SPARE PARTS.
* FOR PREVENTING ANY RISK TO THE OP-
ERATOR, IT IS NECESSARY A REGULAR
INSPECTION AND MAINTENANCE BY THE
TECHNICAL SERVICE.
BEFORE CARRYING OUT ANY MAINTENANCE,
VERIFY THAT THE POWER SUPPLY CABLE IS
DISCONNECTED TO AVOID ELECTRICAL SHOCK
OR CONTACTS WITH STEAM.
– If it is not possible to disconnect the
a.c. power and the external auto-
matic circuit breaker is far or not visi-
ble to the person in charge of the
maintenance, the notice WORK IN
PROGRESS must be placed on the ex-
ternal breaker and it must be
switched in OFF position.
STANDARD MAINTENANCE AND AUTOCLAVE CLEANING
To Next Page
Loading...
