100
Display Operating Procedure
Description
“Technical” Programming
Eco Mode
• This parameter allows the technician to
set up a temperature to be maintained
in case of a temporary non utilization of
the espresso machine.
• It is possible to set this parameter also
during the normal operation of the
machine by pressing T1 and T2 at the
same time.
Enter Password
Eco Mode
Settings
Eco Mode
E xit
5
Press T1 or T2 until the display shows the exit menu, press the T3 button to return to the “Technical”
programming.
E xit
Menu
6
To exit the menu move between the parameters using the buttons T1 and T2 until the exit menu is
displayed. Press the T3 button to exit the menu and return to the normal use of the espresso machine.
G1█ MODBAR G2█
163Puls 0Puls
7
Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine
by pressing T2
and T3 at the same time.
To Next Page
Loading...
