modbar av Series - Page 105

EN
105
Display
Operating Procedure
Description
“Technical” Programming
Filter Alarm
• This parameter enables the technician
to program an alarm that will alert the
user about the need for maintenance or
replacement of the water lter.
• Once the set volume has been reached,
the error message “Filter Alarm” will be
displayed.
• A value of 0 (zero) disables the lter
alarm parameter.
• This feature can be enabled or disabled.
Enter Password
Filter Alarm
Settings
Filter Alarm
Reset 0 Liters
5
Press the T3 button to enter the menu, move between the parameters with the buttons T1 and T2 to
set the desired value, press the T3 button to conrm the value.
Filter Alarm
E xit
6
Press T1 or T2 until the display shows the exit menu, press the T3 button to return to the “Technical”
programming.
E xit
Menu
7
To exit the menu move between the parameters using the buttons T1 and T2 until the exit menu is
displayed. Press the T3 button to exit the menu and return to the normal use of the espresso machine.
G1█ MODBAR G2█
163Puls 0Puls
8
Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine
by pressing T2
and T3 at the same time.