106
Display Operating Procedure
Description
“Technical” Programming
Reset
• This parameter allows the technician to
reset all the values returning to initial
factory settings.
• It is possible to reset the settings you
made in the “Barista” programming or
the settings you made in the “Technical”
programming.
Enter Password
Reset
Settings
Enter Password
1
After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2
until the following screen is displayed.
Reset
Settings
2
Press the T3 button to enter the menu.
Barista Settings
Reset
3
Press the T3 button to reset the settings you made in the “Barista” programming.
Tech. Settings
Reset
4
Press the T3 button to reset the settings you made in the “Technical” programming.
To Next Page
