59
Display
Operating Procedure
Description
“Barista” Programming
CB Settings
E xit
5
Press T1 or T2 until the display shows the exit menu, press the T3 button to return to the “Barista”
programming.
6
Press T1 or T2 to continue with the programming of the other parameters.
G1█ MODBAR G2█
163Puls 0Puls
7
Press T2 and T3 at the same time to exit the programming mode and return to the normal use of the
espresso machine.
• This parameter allows the operator to
program the coffee boiler temperature.
Each group can have a different
programming.
• For an espresso machine composed of 1
group you can only set the coffee boiler
1, while for an espresso machine with 2
groups you can also set the coffee boiler
2.
Coffee Boiler
Group Dose
Settings
Coffee Boiler
Settings
To Next Page
Loading...
