modbar av Series - Page 83

EN
83
Display
Operating Procedure
Description
“Technical” Programming
(only on ABR espresso machine models)
Enter Password
Scale
Configuration
Scale Configuration
• This parameter allows the operator to
view and manually change each dose for
each Selection Indicator.
• For greater accuracy and consistency of
the doses, it is recommended that you
set each Selection Indicator.
• The dose can be set by pulses or by
mass (weight).
• This parameter enables the technician
to set some scale parameters like:
- Enabling/disabling the offset
parameter;
- Setting the weight reading time;
- Calibrating the scales;
- Updating the scale software.
Enter Password
1
After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2
until the following screen is displayed.
Scale
Configuration
2
Press the T3 button to start the doses programming procedure.
Auto Offset
ENABLED
3
Press the T3 button to enter the menu, move between the parameters using the buttons T1 and T2
to select ENABLED or DISABLED, press the T3 button to conrm the option.
Scale Tare Time
3s
4
Press the T3 button to enter the menu, navigate the parameters using the buttons T1 and T2 to set the
desired value. This parameter is common to all groups.