86
Display Operating Procedure
Description
“Technical” Programming
(only on ABR espresso machine models)
13
Press T1 or T2 to continue with the programming of the other parameters.
G1█ MODBAR G2█
163Puls 0Puls
14
Press T2 and T3 at the same time to exit the programming mode and return to the normal use of the
espresso machine.
Enter Password
Scale
Configuration
Scale Configuration
• This parameter allows the operator to
view and manually change each dose for
each Selection Indicator.
• For greater accuracy and consistency of
the doses, it is recommended that you
set each Selection Indicator.
• The dose can be set by pulses or by
mass (weight).
• This parameter enables the technician
to set some scale parameters like:
- Enabling/disabling the offset
parameter;
- Setting the weight reading time;
- Calibrating the scales;
- Updating the scale software.
To Next Page
Loading...
