Mode com MC-420 - 4 Confi Gure Wireless ADSL2+ Router Via HTML; Login

www.modecom.eu
14
WIRELESS ROUTER ADSL
Confi gure IP Address Manually:
Step 5: Select Use the following IP address and Use the following DNS server addresses.
IP address: Fill in IP address 192.168.1.x (x is a number between 2 to 254).
Subnet mask: Default value is 255.255.255.0.
Default gateway: Default value is 192.168.1.1.
Preferred DNS server: Fill in preferred DNS server IP address.
Alternate DNS server: Fill in alternate DNS server IP address.
You can use ping command under DOS prompt to check if you have setup TCP/IP protocol correctly and if your com-
puter has successfully connected to this router.
1) Type ping 192.168.1.1 under DOS prompt and the following messages will appear:
Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 times<2ms TTL=64 Reply from
192.168.1.1: bytes=32 times<1ms TTL=64 Reply from 192.168.1.1: bytes=32 times<10ms TTL=64
2) If the communication link between your computer and router is not setup correctly,
after you type ping 192.168.1.1 under DOS prompt following messages will appear:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Cable issue or something wrong might cause this failure in confi guration procedure.
4. Confi gure Wireless ADSL2+ Router via
HTML
This device supports a Web-based (HTML) GUI to allow users to confi gure Router setting via Web browser.
4.1 Login
1) Launch the Web browser.