Mode com MC-420 - Product Features

To Next Page

To Previous Page

www.modecom.eu

WIRELESS ROUTER ADSL

1.2 Product Features

Application Diagram

Internet

MC-420

High Speed Internet Access

This Wireless ADSL2+ router complies with ADSL / ADSL2 / ADSL2+ standards. It can support downstream rates of up

to 24Mbps and upstream rates of up to 1Mbps. This ADSL2+ router is compliant with the following standards.

• ANSI T1.413 issue 2

• ITU-T G.992.1 (G.dmt)

• ITU-T G.992.2 (G.lite)

• G.994.1 (G.hs, Multimode)

• ITU-T G.992.3 (ADSL2 G.dmt.bis)

• ITU-T G.992.4 (ADSL2 G.lite.bis)

• ITU-T G.992.5 (ADSL2+; Annex A, I, J, L & M)

• Reach Extended ADSL (RE ADSL)

Quick Setup Wizard

Support Quick Setup Wizard Web GUI to conﬁ gure this Wireless ADSL2+ router easily and quickly.

Multi-connection protocol support

• Multi Protocol over AAL5 (RFC1483 / 2684)

• Classical IP over ATM (RFC 1577)

• VC and LLC Multiplexing

• PPP over Ethernet (RFC 2516)

• PPP over ATM (RFC 2364)

Network Address Translation (NAT)

Network Address Translation (NAT) allows the translation of an Internet protocol address used within one network (for

example a private IP address used in a local network) to a different IP address known within another network (for ex-

ample a public IP address used on the Internet).

Universal Plug and Play (UPnP)

Universal Plug and Play is a standard that uses Internet and Web protocols to enable devices such as PCs, peripher-

als, intelligent appliances, and wireless devices to be plugged into a network and automatically know about each other.

This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs.