modway Adept EEI-3061 - Bench Assembly Instructions; Step 1: Prepare Bench and Components; Step 2: Attach First Leg

EEI-3061 BENCH
Customer Service 908-368-1025︱www.modway.com
Page 2 of 4
STEP 1:
Please put Bench Body (1) on a carpeted or padded surface.
Open the zipper the bottom of the Bench Body (1) and take out the 2 pieces of Leg (2) and 4 pieces of Leg
Stretcher (3) & 2 pieces of Leg (4) and hardware from the legs box.
STEP 2:
Attach 1 piece of Leg (2) to the bottom of Bench Body (1) by using 2 pieces of Bolts (A) with 2 pieces of Spring
Washer (C) and 2 pieces of Flat Washer (D) as shown.
Tighten Bolts (A) by using Allen Wrench (E) as shown.
Hardware & Tools required