modway Adept EEI-3061 - Step 3: Attach Leg Stretchers; Step 4: Attach Remaining Legs

EEI-3061 BENCH
Customer Service 908-368-1025︱www.modway.com
Page 3 of 4
STEP 3:
Insert the smaller end of Leg Stretcher (3) into the hole of Leg （2） and attach the other end of Leg Stretcher
(3) to the bottom of Bench Body (1) by using 1 piece of Bolts (B) with 1 piece of Spring Washer (C) and 1 piece
of Flat Washer (D) as shown.
Hardware & Tools required
STEP 4:
Repeat the same steps for other pieces of Leg (2) & Leg Stretcher (3) and Leg (4) & Leg Stretcher (3).
Place Legs (2&4) to the right postion as shown.
Hardware & Tools required
B
x 2
A
x 6
x 4
D
x 1
E
C
x 6