modway EEI-1109 - Step 1: Attach Backrest to Seater Frame; Step 2: Mount Seater to Seater Frame

EEI-1109 & 3869 OFFICE CHAIR
Customer Service 609-256-9000︱www.modway.com
Page
2
of 4
STEP 1:
1. Attach
the Backrest (6)
to the Seater frame (5) by using 2 pieces of Nuts (E) and 2 pieces of
Spring Washers (F) as shown.
2. Use Nut Driver (G) to tighten all Nuts (E) clockwise as shown.
STEP 2:
1. Put the Seater (7) on the the Seater Frame (5) as shown.
2. Carefully turn over the assembled Seater Frame (5) and make sure the holes of the Seater (7) are
aligned with the holes of the Seater Frame (5) as shown.