modway EEI-3508 - Step-by-Step Assembly Instructions; Attaching the Legs; Final Assembly Check

EEI-3508/3509 CHAIR
Customer Service 908-368-1025︱www.modway.com
Page 2 of 2
STEP 1:
1. Take the Legs (2) package from the back of Chair body (1).
2. Position 1 piece of Leg (2) at one of the corners of the Chair body (1).
3. Insert 3 pieces of Bolts (A), 3 pieces of Spring Washers (B) and 3 pieces of Flat Washers (C) into the
corner to connect the leg (2). Use Allen Wrench (D) to tighten the Bolts (A) clockwise as shown.
4. Repeat the same steps for the remaining 3 pieces of Legs (2).
STEP 2 :
Carefully turn over the Chair.
Assembly is complete. Your Chair is ready to enjoy now!