About the Display/Operator
System
6
10/04 AWB2528-1548GB
Overview The display/operator system can be connected with easy500,
easy700, easy800 or MFD-CP8... basic units to implement
the following tasks:
• Display on the MFD-CP4 of the status or text display of the
connected basic unit.
• Remote operation of the connected basic unit via the
MFD-CP4 keypad.
The devices can be linked together easily via the serial
interface.
If the display/operator system is connected to an easy basic
unit in the EASY-NET network, it is also possible to operate
any other device in the EASY-NET via the display/operator
unit and display its status, regardless of the device in the
EASY-NET to which the display/operator system is
connected.
Legend for figure 1:
a easy500 basic units
b easy700 basic units
c MFD80-B/MFD-80 multi-function display
d Power supply/communication module with MFD-CP4-500
(above) or MFD-CP4-800 (below) connection cable
e easy800 basic units
To Next Page
Loading...