Terminals
25
10/04 AWB2528-1548GB
Connecting the connection cable
The MFD-CP4 is provided with a serial interface. This is used
for point-to-point communication between the MFD-CP4
and an easy500, easy700, easy800 or MFD-CP8.. if there is
no PC connected to these devices.
Selecting a suitable connection cable
Different connection cables are required depending on
which device is connected to the MFD-CP4:
Table 2: Selecting connection cables
The MFD-CP4-500-CAB5 and MFD-CP4-800-CAB5
connection cables are 5 m long.
MFD-CP4 connected to ... Connection cable
easy500 (from device version 01) MFD-CP4-500-CAB5
easy700 (from device version 01)
easy800 (from device version 04)
MFD-CP4-800-CAB5
MFD-CP8.. (from device
version 01)
MFD-AC-CP8.. (from device
version 01)
h
In order to ensure correct EMC, the MFD-CP4-500-CAB5
and MFD-CP4-800-CAB5 connection cables must not be
lengthened.
To Next Page
Loading...