Setting the menu language
37
10/04 AWB2528-1548GB
Changing the lighting If the main menu of the display/operator system is not active,
press the “*” button to enter the menu.
X Use the Í and Ú buttons to select the Lighting menu
item.
The cursor moves to the percentage value of the lighting.
X Press OK.
Now change the value in 10% steps with the
Í and Ú.
X Press the Í or Ú buttons to change the value.
X Press OK or ESC to exit Edit mode
If Selection mode is active, you can exit the main menu at
any time by pressing the “*” button.
COM...
MENU LANGUAGE...
LIGHTING: 60%
CONTRAST: +2
h
When Selection mode is active, the cursor appears as
black flashing rectangle. Pressing OK will activate Edit
mode in which the cursor will disappear and the number
will flash. In Edit mode, use the
Í and Ú to change the
value. The changes are displayed immediately.
COM...
MENU LANGUAGE...
LIGHTING: 70%
CONTRAST: +2
To Next Page
Loading...