Commissioning
30
10/04 AWB2528-1548GB
Initial Commissioning When you switch on the display/operator system for the first
time, you will be asked to select the menu language.
X Select the required menu language and confirm the
setting by pressing the OK button.
X Press ESC to exit language selection.
You can change the language setting at a later time as
required, (see a Section “Setting the menu language”,
Page 36).
If the device was switched on for the first time, the display/
operator system will try to establish a connection with the
default settings to a connected device. The status and text
display of the remotely operated device is displayed as soon
as the connection can be established.
h
If you do not set the language, the display/operator system
will display this language menu every time you switch on,
and wait for you to select a language.
Connection
establishment
in progress...
To Next Page
Loading...