Monoprice Mini Delta V2 - Adhesion, Retraction, and Material Settings

40
Build Plate Adhesion Tab
• Raft Air Gap (mm): The distance between the raft and the model. This determines
the difficulty of removing the raft from the model.
• Raft Extra Margin (mm): The distance between the edge of the raft and the model
surface.
• Raft Base thickness (mm): Determines the thickness of the raft.
• Initial Layer Z Overlap: Determines the amount of overlap between the first and
second layers of the model.
• Brim line amount: Sets the number of ring gaskets that are added to the edge of the
model in contact with the build platform.