Monroe One-Net SE - Page 12

One-Net/DASDEC User Manual 2-3v3.0 | r0616
Back Panel
Analog Audio Wiring
The rst type of inputs connects to internal EAS decoders (8, 10). These inputs are
ulized to process broadcast EAS messages, and are aached to external radio
receivers or other EAS equipment. 3.5mm TRS audio jack (mini) connectors are used for
these inputs. Each EAS decoder accepts a mono audio signal. This single stereo input
jack feeds two separate EAS decoders.
EAS Audio Connectors
The second type of analog audio inputs (1) are connected to the main program audio
when internal switching of the audio signal is to be performed within this EAS device.
These balanced audio inputs are only ulized for program audio switching, and do not
e to the EAS decoders. A screw type, pluggable terminal connector is used.
Program Audio Connectors
Note
A dual RCA to 3.5 mm
jack input adapter can
be used to connect two
separate mono input
signals to an EAS unit
line input jack.
Note
This feature is typically
used in call-leer
broadcast facilies
where the main
programs’ audio signal
is bypassed during
EAS alerts. Internal
switching of a single
audio signal is not an
eecve means of
interrupng audio in
facilies where mulple
programs need to be
switched during alerts.