Monroe One-Net SE - Page 8

One-Net/DASDEC User Manual 1-2v3.0 | r0616
• If the system soware is manually stopped or temporarily restarted due to an
internal problem, the LCD displays a Server Stopped message unl the soware
restarts to a ready state.
• During the decoding of an incoming alert, the LCD displays informaon about the
source and the stage of the decoding.
• While decoded, forwarded, or originated alerts are acve, the top line repeats,
displaying pernent idencaon for each acve alert.
• When a backup conguraon is loaded, or when the server soware is restarted,
the LCD indicates when the server is down or running again.
• During a soware upgrade, the LCD display progresses through server down states,
and eventually displays Upgrading. When the upgrade is complete, the LCD returns
to the normal display state.
Status LEDs
The system’s two Light Eming Diodes (LEDs) are used for a variety of status
indicaons.
System Status – Green LED Alert Status – Red LED
When the unit is rst powered on, the
green LED is dark.
When the unit is rst powered on, the
red LED is dark.
When the system begins to boot, the LED
begins to blink.
Aer the system is operaonal in a ready
state (green LED is solid), the red LED
indicates decoding, alert sending status,
and unacknowledged, un-forwarded
acve decoded alerts.
When the system nears a ready state, the
LED blinks rapidly.
If the LED is blinking quickly, with pauses,
the server is decoding an incoming alert.
When the system is ready, the green LED
light is solid green, indicang that the
system is operaonal.
If the LED is solid, the unit is sending an
EAS alert.
If the LED starts blinking, the server has
become non-operaonal. This can hap-
pen during soware restart or upgrades.
If the LED is blinking slowly and regularly,
an acve alert has been decoded and has
not been forwarded or acknowledged.
Alerts are acknowledged by pressing
the front panel buon or by pushing the
Acknowledge Pending Alert buon for
the alert on the web browser interface.
If the LED is blinking quickly and regularly,
an acve alert is being held pending GPI 1
input closure.