37
Preset editing
The effect chain area shows the order and status of the modules for the current preset.
Parameter adjustment: Click on a module, to show the module's parameters in the area
below and you can adjust them directly using your mouse.
Changing the order: Select an effect module, hold it and drag it to the desired position.
Saving changes: When any changes have been made in a preset patch, the saving icon in the
preset saving area will flash as a reminder. After you confirm saving, the changes will be
saved.
Expression pedal settings
You can find the expression pedal options at the bottom of the parameter adjustment area. Click the
respective dot icons to assign selected parameters to the expression pedal. You can also adjust the
minimum and maximum values.
Click on the expression pedal icon in the functions and settings bar at the top to see all parameters
controlled by the expression pedal. You can edit them directly.
On the right side of the expression pedal area, you can assign the function associated with pressing
the toe switch on the pedal.
Note: The changes in the settings of the expression pedal must be saved manually into the preset
patch.
Preset volume level and BPM settings
You can adjust the preset volume level and the BPM setting in the functions and settings bar. You can
use the TAP function for BPM setting: click the TAP icon several times to input a tempo.
When the tempo parameters of a Delay module or some of the Modulation modules are set for
TEMPO SYNC, they will all sync with the TAP value you have set.
Note: In the SYSTEM settings menu, you can set the TAP tempo as global TAP input or as TAP input
for the current Preset.
SYSTEM Settings
Click on the SYSTEM settings icon to open the Systems menu. Use this menu to adjust various
globally effective systems parameters. (See section SYSTEM SETTINGS.)
To Next Page
