Mooer PREAMP LIVE - MODE B (A;B)

MODE B (A/B)
MODE B is a special FX LOOP that will bypass the digital preamp section of PREAMP LIVE and
replace it with the analog preamp section of your amplifier. This allows you to connect PREAMP
LIVE up to an amplifier head or combo with 4 cables and use the preamp section of the head/
combo instead of the digital PREAMP when the FX LOOP is active.
Send
Output
Input
Return
Send
Return
14
For example, I can use a digital preamp on channels 1, 2 and 4 and use the preamp
from my amplifier head or combo on channel 3 by activating the effects loop
(in MODE B) on channel 3.
A/B
FX LOOP
MOOE B
When the effects loop is set to MODE B (A/B) the POST NG will be after the effects loop.