Connections
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 12V DC1A, ,
center negative. Unplug the AC power adapter when not in use or during electrical
storms.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning
fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
that may cause undesired operation.
Strong vibrations or shocks
Location
Direct sunlight
Magnetic fields
Excessive dusty or dirty location
To avoid deformation, discoloration, or other serious damage, do not expose this unit to
the following conditions:
Heat sources
Extreme temperature or humidity
High humidity or moisture
1
PLEASE READ CAREFULLY BEFORE PROCEEDING
Always turn off the power of this and all other equipment before connecting or
disconnecting, this will help prevent malfunction and / or damage to other devices.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.
PRECAUTIONS
To Next Page
Loading...
