23 | The Voltage Controlled Oscillator (VCO)
PITCH MOD AMT (Pitch Modulation Amount)
This knob determines the amount of modulation being applied to the PITCH
parameter. The shape of this modulation is determined by the position of the
VCO MOD MIX knob. Rotate the PITCH MOD AMT knob clockwise to increase
the amount of modulation being applied to the PITCH parameter. Rotate the
PITCH MOD AMT knob counterclockwise to reduce the amount of modulation
being applied to the PITCH parameter.
PWM AMT (Pulse Width Modulation Amount)
This knob determines the amount of modulation being applied to the
PULSE WIDTH parameter. The shape of this modulation is determined by the
position of the VCO MOD MIX knob. Rotate the PWM AMT knob clockwise
to increase the amount of modulation being applied to the PULSE WIDTH
parameter. Rotate the PWM AMT knob counterclockwise to reduce the
amount of modulation being applied to the PULSE WIDTH parameter.
TIP: Pulse Width Modulation is a tried-and-true technique for creating motion
and adding texture to a sound and is often used as the foundation for many
string and pad types of sounds.
To Next Page
Loading...
Need help?
General
