Moog MINIMOOG MODEL D - Gate Source & Velocity Control

48 | Global Settings
Gate Source Power-On Commands
Determines which sources will trigger the Keyboard Gate and Contour Generators
External Gate
Hold F2 + A2 while turning on the power.
Sets gate source as EXT. V-TRIG input only
External and Local
Keys (No MIDI)
Hold F2 + Bb2 while turning on the power.
Sets gate source as both the local keyboard and the EXT. V-TRIG input —notes received via MIDI will not
trigger the contour generators
External and MIDI (No
Local Keys)
Hold F2 + B2 while turning on the power.
Sets gate source as both MIDI and the EXT. V-TRIG input —keys pressed on the keyboard will not trigger
the contour generators
External, MIDI, and
Local Keys (All)
Hold F2 + C3 while turning on the power.
Sets gate source as the local keyboard, MIDI input, and the EXT. V-TRIG input—this is the
default behavior
Velocity Control Voltage Range Power-On Commands
The voltage range of the Velocity control output can be doubled from five volts to ten volts in order to
accommodate dierent types of analog equipment.
Velocity CV Range = 5
Volts
Hold G0 + C#1 while turning on the power.
Limits the Velocity CV range to 5 Volts
Velocity CV Range = 10
Volts
Hold G0 + D1 while turning on the power.
Expands the Velocity CV range to 10 Volts
Global Settings