MC Series Brushless Driver User Manual
2
2023 - September version V1.2
Preface
1 Platform Introduction
The MC (Micro Controller) series drivers are specially designed for MOONS' coreless products .
MOONS' will continue to improve the control mode, communication method and feedback type to
provide more product choices. Users can easily configure parameters through the matching host
computer control program to achieve fast motor drive. At the same time, MOONS' also provides a
complete set of solutions, including coreless motors, gearboxes, encoders and brakes. If you tell us
your needs, our engineers will select the most suitable product for you.
If you have any questions or suggestions, please call us or send us your email.
2 Safety Instructions
The installation, commissioning, use and maintenance of this product must be performed by
personnel with professional qualifications and familiar with the above operations .
When installing this device, please turn off the power first. It is strictly forbidden to install it
with power on, otherwise it is very easy to cause personal injury and damage to the equipment.
At the same time, please ensure protection against unexpected calls after power off.
This device is an electronic device and may be damaged by external static electricity. Please
make sure you are free of static electricity before touching the product. Do not touch the
internal electronic components directly with your hands unless necessary .
Do not hot-plug the cables while the device is in use; otherwise, it may cause damage to the
device and even serious personal injury.
Please comply with local industry regulations when using this equipment .
To avoid electric shock accidents, please ensure that the entire system is well grounded when
using this device.
Please install this device in a suitable location to avoid external interference or accidental
touch by non-professionals that may cause malfunction or danger.
To Next Page
Loading...
