Moons' MC Series - Technical Data

MC Series Brushless Driver User Manual
8
2023 - September version V1.2
1.2 Technical data
MCSE5005-CF-COM-S001
Electrical
parameters
Rated operating
voltage
DC 12-50V
Rated current
5A
Rated output power
120W ( external heat dissipation is recommended if the power
is greater than 120W ), power limit 250W
PWM frequency
50KHz
Maximum efficiency
98%
Maximum speed
150000rpm/ pole pairs
Speed controller
scanning frequency
500Hz
I/O port
function
Analog input port
External speed control input
(The effective input range is 0.5-4V, corresponding to a duty
cycle of 0-98%)
Analog output port
Speed feedback output
(Output range 0.5-2.9v , configurable on software )
Digital output port 1
Speed feedback output 250 per rotation
us square wave signal
Digital input port 1
Steering control high level/floating counterclockwise, low
level clockwise
Digital input port 2
PWM signal input port
Duty cycle input range:
Duty cycle: 5-95% Frequency: 500-5kHz Amplitude voltage:
5V
Digital input port 3
Enable high level/floating to disable, low level to enable
Communication
function
UART