Moore Industries 535 - DC Logic (SSR Drive) Output; Milliamp Output; Position Proportioning Output; Figure 3.3

Install / Wire
18 Chapter 3 535 User's Manual
POSITION
PROPORTIONING
OUTPUT
11
12
3
10
Slidewire Wiper
0–1050 Ohm
CW
CCW
Electric Motor Actuator
CW
Winding
6
5
4
COM
CW
CCW
COM
Actuator
Supply
Current
CCW
Winding
3. DC Logic (SSR Drive) Output
• Output 1 is always Control 1.
• Respective jumper J1, J2 or J3 must be set to normally open for DC
Logic output.
• Output 4 is always configured for normally open.
4. Milliamp Output
• Output 1 is always Control 1.
• Respective jumper J1, J2 or J3 must be set to normally open for
Milliamp output.
5. Position Proportioning Output
(with or without Slidewire Feedback)
3
4
_
+
Load
_
+
Terminals used
with Output
Module 2
Terminals used
with Output
Module 3
Terminals used
with Output
Module 4
7
8
5
6
Terminals used
with Output
Module 1
15
16
3
4
3
4
_
+
Load
Terminals used
with Output
Module 2
Terminals used
with Output
Module 3
Terminals used
with Output
Module 4
7
8
5
6
Terminals used
with Output
Module 1
15
16
3
4
Figure 3.13
DC Logic Output Wiring
Figure 3.15
Position Proportioning Output
Wiring
Figure 3.14
Milliamp Output Wiring