Performance Adjustment Pages
Operator’s Manual, Morbark Integrated Control System—Model 20 Chipper
24
Introduction
The sub-menus provide access to a variety of information about the Machine. This sec-
tion will explain each of them in detail.
Contained in this section:
Adjust Menu — Provides access to the various adjustable settings on the Machine •
Measure Menu — Provides the ability to measure the performance of various
•
parameters on the Machine.
Preferences Menu — Allows modification of settings specific to the Display
•
Module
Info Menu — Provides quick access to information about the Machine•
Note: To return to the “Main”
menu screen from within a sub-
menu press the “F1” button.
Note: The “AutoFeed Settings”
Page requires a pin number to
access the settings. This number
is set to 0747. All other settings on
this page are Pre-Set at the fac-
tory and adjustable by the OEM
only.
To Next Page
Loading...